أرجو ان تزودني بهذه المصادر على قدر استطاعتك وشكرا جزيلا
REFERENCESACI Committee 209, 1992, “Prediction of Creep, Shrinkage, and
Temperature Effects in Concrete Structures (ACI 209R-92),” American
Concrete Institute, Farmington Hills, Mich., 47 pp.
ACI Committee 318, 2005, “Building Code Requirements for StructuralFig. 13—Effect of live load and span length on span-depth
ratio for both ends continuous one-way slabs.
Fig. 14—Effect of live load and span length on span-depth
ratio for one end continuous one-way slabs.
ACI Structural Journal/January-February 2007 67Concrete (ACI 318-05) and Commentary (318R-05),” American Concrete
Institute, Farmington Hills, Mich., 430 pp.
Ayoub, H., and Karshenas, S., 1994, “Survey Results for Construction
Live Loads on Newly Poured Slabs,”Journal of Structural Engineering,
ASCE, V. 120, No. 5, pp. 1543-1562.
Bažant, Z. P., 1985, “Probabilistic Analysis of Creep Effects in Concrete
Structure,” 4th International Conference of Structural Safety and Reliability,
Branson, B. E., 1963, “Instantaneous and Time-Dependent Deflections
of Simple and Continuous Reinforced Concrete Beams,” HPR Publication 7,
Part 1, Alabama Highway Department, Bureau of Public Roads, pp. 1-78.
Bureau of Labor Statistics, 2003, “National Compensation Survey:
Occupational Wages in the United States,” U.S. Department of Labor,
Washington, D.C., 184 pp.
Choi, B.-S.; Scanlon, A.; and Johnson, P. A., 2004, “Monte Carlo
Simulation of Immediate and Time-Dependent Deflections of Reinforced
Concrete Beams and Slabs,” ACI Structural Journal, V. 101, No. 5, Sept.-
Oct., pp. 633-641.
Ellingwood, B., and Culver, C. C., 1977, “Analysis of Live Loads in
Office Buildings.” Journal of the Structural Division, ASCE, V. 103, No. 8,
El-Shahhat, A. M.; Rosowsky, D. V.; and Chen, W. F., 1993, “Construction
Safety of Multistory Concrete Buildings,” ACI Structural Journal, V. 90,
No. 4, July-Aug., pp. 335-341.
Graham, C. J., and Scanlon, A., 1986, “Long-Time Multipliers for
Estimating Two-Way Slab Deflections,” ACI JOURNAL, Proceedings V. 83,
No. 6, Nov.-Dec., pp. 899-908.
Hossain, N. B., 2000, “Time-Dependent Deflections, Serviceability,
Reliability and Expected Costs of Unserviceability for Reinforced Concrete
Flexural Beams,” PhD thesis, Department of Civil, Surv. and Environmental
Engineering, University of Newcastle, Newcastle, Australia, 244 pp.
Hossain, N. B., and Stewart, M. G., 2001, “Probabilistic Models of
Damaging Deflections for Floor Elements,” Journal of Performance of
Constructed Facilities, ASCE, V. 15, No. 4, pp. 135-140.
Julian, O. G., 1966, discussion of “Strength Variations in Ready-Mixed
Concrete,” by A. E. Cummings, ACI JOURNAL, Proceedings V. 51, No. 9,
Sept., pp. 772-4 to 772-8.
Koskisto, O. J., and Ellingwood, B., 1997, “Reliability-Based Optimization
of Plant Precast Concrete Structures,” Journal of Structural Engineering,
ASCE, V. 123, No. 3, pp. 298-304.
Mayer, H., and Rusch, H., 1967, “Building Damage Caused by Deflection
of Reinforced Concrete Building Components,”Technical Translation
1412, National Research Council of Canada, Ottawa, Canada, 115 pp.
Mirza, S. A.; Hatzinikolas, M.; and MacGregor, J. G., 1979, “Statistical
Descriptions of the Strength of Concrete,”Journal of the Structural Division,
ASCE, V. 105, No. 6, pp. 1021-1037.
Mirza, S. A., and MacGregor, J. G., 1979, “Variability of the Mechanical
Properties of Reinforcing Bars,” Journal of the Structural Division,
ASCE, V. 105, No. 5, pp. 921-937.
Naaman, A. E., and Amnuayporn, S., 1982, “Reliability of Partially
Prestressed Beams at Serviceability Limit States,” PCI Journal, V. 27,
Reid, S., and Turkstra, C., 1980, “Serviceability Limit States—Probabilistic
Description,” Report ST 80-1, McGill University, Montreal, Canada, 94 pp.
Reid, S., and Turkstra, C., 1981, “Codified Design for Serviceability,”
ReportST 81-6, McGill University, Montreal, Canada, 139 pp.
Rosowsky, D. V., and Stewart, M. G., 2001, “Probabilistic Construction
Load Model for Multistory Reinforced-Concrete Buildings,” Journal of
Performance and Constructed Facilities, ASCE, V. 15, No. 4, pp. 145-152.
RS Means, 2002a, “Building Construction Cost Data,” RS Means Co.,
Inc., Kingston, Mass., 700 pp.
RS Means, 2002b, “Repair and Remodeling Cost Data,” RS Means Co.,
Inc., Kingston, Mass., 625 pp.
Sarma, K. C., and Adeli, H., 1998, “Cost Optimization of Concrete
Structures,” Journal of Structural Engineering, ASCE, V. 124, No. 5,
Stewart, M. G., 1996, “Serviceability Reliability Analysis of Reinforced
Concrete Structures,” Journal of Structural Engineering, ASCE, V. 122,
No. 7, pp. 794-803.
Trost, H., 1967, “Implications of the Superposition Principle in Creep
and Relaxation Problems for Concrete and Prestressed Concrete,” Beton
and Stahlbetonbau, West Berlin, Germany, V. 62, pp. 230-238 and 261-269.
Turkstra, C., and Reid, S., 1981, “Probabilistic Design for Serviceability,”
3rd International Conference on Structural Safety and Reliability, Trondheim,
Norway, pp. 583-592.